LV Products

SAFVOLT is engaged in Design, Development, Manufacturing of All types of Industrial Electrical Panels, Motor Control Center (MCC), Power Control Center (PCC), Automatic Power Factor Control Panel (APFC), Medium Voltage (MV) Drive Control Panels and all other Customized Panels, Drive Panels, Single Phase, Three Phase Submersible Control Panels for OEMs and customized panels.

SAFVOLT has developed a new generation expandable electrical panels to suit any industry and to meet the future requirements.

SAFVOLT has an excellent team of engineers who can install and commission equipments like static, numerical relays, automation equipments, PLC panels, operating desks, and machine VFD drive panels as per the consumer requirements.


SAFVOLT range of Low Voltage Electrical Panels

Motor Control Center (MCC) Panels

We are recognized as one of the leading manufacturers of (Motor Circuit Control) MCC panels widely appreciated across the country. These have the capacity to feed larger loads and are designed as per the client specifications.

The MCC panels conform to the international standards and are available with multiple power stabs that help in supporting high capacity industrial motors.These are basically available in ergonomic designs with draw out and non-draw out types but we also specialize in customizing the design of these panels to suit application requirements by our clients.Our panels are widely appreciated by the clients for their supreme quality and unmatched performance
. Read More


Power Control Centers
(PCC) Panels

We are engaged in manufacturing of power control centers from the best raw materials.We meet the requirements of International Standards along with compliance to local standards and regulations.

The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired.

Finish: The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements.

Bus Bars & Internal Wiring Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Read More


Automatic Power Factor Control (APFC) Panels


APFC or Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor. Power Factor can be explained as ratio of active power to apparent power and it is a key factor in measuring electrical consumption. Everyone knows that how costly electricity has become in present time. Therefore it becomes utmost important to cut down on electrical consumption for reducing expenditure.

APFC Panels come real handy in the achievement of this purpose Use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to large electrical load.

A dip in Power Factor can attract operational losses and a penalty from electricity board, responsible for electricity supply. Read More


AMF Panels

We are also specialized in manufacturing AMF panels which are used widely in foundries, apartments, textiles and other varied industries. Our panel comes with various functions and timers which help in the efficient running of the AMF panels. It also consists of the metering facilities for monitoring of the frequency/current/voltage. We can also customize it according to the client specifications and details.

We offer automatic mains failure panels or automatic AMF panels, that are installed for automatic changeover from mains to stand-by generator at the time of power failure. Fabricated from premium quality raw material, these automatic AMF panels are durable, corrosion resistant, dust and vermin proof. Easy to operate and install, these synchronized AMF panels are used in areas like foundries, apartments, textiles, sugar and chemical industries.

Our range of AMF panel includes automatic changeover with current limit, battery charger, power inverters, automatic changeover and sine wave inverters. Read More

Synchronized AMF Panels

DG-Grid Synchronizing-AMF Panels



MV LV Soft Starter Panels


We manufacture and supply qualitative MV Soft Starter panels. These are widely used to eliminate the high inrush current and start-up torque on every start. These also provide starting parameters that increase the life of heavy-duty compressor & blower, ID/FD, fans, chillers, coolers and pumps. We use premium electrical components, compressors, motors and allied material for the fabrication process.   

The soft starter panels are incorporating with motor protection device/relay as RS 485 communicable with overload, under current ground fault current imbalance over temperature package.

Specifications:
•    Soft starter principle of Flux compensated non-saturated magnetic amplifiers for controls of motor starting current.
•    The starter should not introduce any hormonics & volt drop.
    Facility can provide By pass contactor & starter cabinet having IP-31 protection with LBS Fuses As I/c
  Read More


Harmonic Control / Filter Panels

The basic purpose here is centralized Reactive Power Compensation with Harmonic Mitigation. Automatic control is provided using Automatic Power Factor Control relays.

The switching of individual steps is through contactors or thyristors. With thyristor switching it is possible to have panels at higher voltages (upto 690 V), and with large size of single step (108-kVAR).

Based on the load variation pattern, the minimum and maximum size of steps can be determined to maintain optimum power factor. These will help partly mitigate the harmonics from the system.

How Power Factor and Harmonic control panel relate to Energy Efficiency?
In an AC distribution system, the maximum active power is transmitted to a load when voltage and current are undistorted and in phase. Read More

Sub Switch Board 


We are offering a wide range of SSB panels which are made of superior quality of CRCA steel sheets that provides resistance from dust and vermin. Durable and cost effective, these provide superior performance and are highly reliable. Keeping in mind the specific requirements of the end users, we design our products in varied specifications and offered at competitive prices.

We do have ready stock of Sub Switch Boards to meet the customers dynamic requirements, our SSBs are widely accepted by various industries and are international quality.

We have very good facilities to make the SSBs in large quantities with minimum lead time.


Variable Frequency Drive Panel (VFD Panel) 

The Variable frequency drive panels (VFD PANELS) also known as "Digital VFD drives" is an important part of these power panels used for VFD squirrel cage induction, in motor control applications. These Variable frequency drive panels are tested on various parameters before being supplied to the clients. We use (VFD panels) Variable frequency drive panels as per customer preference including Siemens, Allen Bradely, Schneider, Ge Fanuc, Mitsubishi, Abb And Danfos. 

For starting surge control applications even Soft Starters are used and we also provide Soft Starter Panels where the Soft Starters of various makes are offered by us i.e. Siemens, Schneider, ABB etc.

We have supplied our products to various  industries located in Mumbai, Navi Mumbai, MIDC Dombivali, Kalyan, Ambernath, Thane, Pune, Mahad, TTC Mumbai, Roha, Goa, Bangalore, Delhi... Read More

Soft Starter Panel

We manufacture Soft Starter panel for various soft starters such as Siemens, ABB, L&T. These soft starter VFD panels are true on quality standards and suit industrial usage.

As a Manufacturer We have supplied our products to various  industries located in various states including Gujarat, Maharashtra, M.P. Rajasthan and various cities such as  Mumbai, Navi Mumbai, MIDC Dombivli, Kalyan, Ambernath, Thane, Pune, Mahad, TTC Mumbai, Roha, Goa, Bangalore, Delhi.

Enquiries from Traders dealing in these products are also entertained by us.


Bus Ducts

We offer best quality Bus Ducts that can be customized as per the customer’s requirements. All these products are specially designed for different industrial applications are designed to provide better connection, superior performance and more security.

We have a fully equipped facility with the latest and most sophisticated machines.

These Ducts also go through stringent quality checks at all levels. These products can also be customized as per client’s requirements. Read More..



Lighting Distribution Board 

We are engaged in offering Lighting Distribution Boadrs at affordable prices. The boards are equipped with switch gears such as MCCBS/MCBS. These board plays an indispensable role in power distribution .Due to their numerous advantages such as for light loads these products are highly appreciated by our clients . Our professionals make sure that the prices are feasible so that our clients can afford it easily.










Comments