MCC Panels

We are recognized as one of the leading manufacturers of (Motor Circuit Control) MCC panels or Motor Control Panels (MCPs) or Motor Control Centers widely used and appreciated across the country. These have the capacity to feed larger loads and are designed as per the client specifications.

The MCC panels conform to the international standards and are available with multiple power stabs that help in supporting high capacity industrial motors. Our manufactured motor control center (MCC) units comprises of the following:

  • Full voltage non-reversing and full voltage reversing starters
  • AC variable frequency drives
  • PLC I/O chassis
  • Solid-state motor controllers
  • Lighting panels
  • Transformers
  • Analog or digital metering
  • Feeder circuit breakers
  • Feeder fusible disconnects
Key Features of our MCC Panels
  • Custom Design
  • Fixed type, free standing, floor mounting
  • Extendable to both sides
  • Cubical type compartmentalised construction
  • Busbar made of electrolytic grade, aluminium alloy, copper with certified % IACS conductivity
  • Short circuit withstand capacity of 50kA for 1 sec RMS
  • Switchgear and control gear as per customer’s choise
  • Top or bottom cable entry
  • Front and Rear Access
  • Single / Double front construction
  • Designed to meet climatic conditions
  • Powder-coating with imported electrostatic powder gun and fully conveyorised powder-coating plant
  • Design facilitating adequate space for cable and bus duct termination and providing required cable support
  • All live parts are properly shrouded by means of acrylic sheet in order to ensure no accidental contact with live parts during maintenance

Some applications are:

  • S.T.P. & E.T.P. Panels.
  • All pumping Aplication panels
  • R/F Application

MCC Panels

Our MCC panels are available in two categories, fully draw out motor control center and non draw out motor control center.

Technical Specifications:

Fully draw out motor control center control panels:

  • Rated insulation voltage: 660V 50 HZ
  • Rated operated voltage: 415V 50HZ
  • Rated current: Main horizontal busbar 400A to 3000A, vertical riser 600A
  • Short circuit strength: 50 KA RMS for 1sec with 1 sec with a peak current of 105KA
  • Ambient temp.: Design Ambient temp. standard 40°C Operated 45°C & 50°C
  • Degree of protection: Standard - IP 52, IP 54 as IS 13947
  • Single front & double front version of MCC are available

Non draw out motor control center control panels are:

  • Rated insulation voltage 660V 50HZ
  • Rated operated voltage 415V 50 HZ
  • Rated current: Main Horizontal busbar 400A to 3000A, vertical riser depending load
  • Short circuit strength: 50KA RMS for 1sec.with 1 sec with a peak current of 105KA
  • Ambient temp: Design Ambient temp standard 4000°C Operated 4500°C & 5000°C
  • Degree of protection: Standard - IP 52, IP 54 as IS 13947
We are specialized in "Customised MCC Panels based on the customer requirements"

Comments